Semiconductor solar cell, knowledge is indispensable if you explain the operation of a photovoltaic cell. A semiconductor is a material that is conductive between the insulators and the conductors (see band gap for a more extensive discussion of this) The behaviour of a semiconductor depends on some environmental variables, such as temperature or incident light intensity. A semiconductor can be regulated by providing the crystal structure with impurities. Such impurities are called donors for they donate electrons.
One of the most used semiconductors to convert sun energy is the Silicon material. You encounter it in your computer, the television, your radio, but also as the main ingredient of photovoltaic modules. Silicon has (along with the diamond-forming carbon) the unique property that it has four electrons in its outer shell. These electrons can form perfect covalent bonds with surrounding silicon atoms. This means that an extensive network of silicon atoms can bind together into one large crystal. Within such a crystal you will not find free electrons, because each silicon atom shares its outer electrons with its four ' neighbours'. Since free electrons make a material into metal, a silicon crystal is therefore not a metal. A pure silicon crystal, accordingly, does not conduct. In the periodic table, this ambiguity is captured by classifying Silicium as a metalloid.
To make the silicon crystal conductive, we can provide impurities; we're going to donate it. Two types of pollutants can be applied in the crystal:
N-type and P-type semiconductors are not unique in themselves; they are only moderate conductors. However, once you turn on the materials, they become interesting. A known switching element in which this is done is a diode. The moment you connect the battery as shown in the image below, the positively charged holes of the P-material are rejected by the positive pole of the cell. The same applies to the electrons that are dismissed by the negative pole of the battery. At the interface between the P- and N-type material the holes and electrons meet each other. The particles fill the gaps here so that new holes and electrons are released elsewhere in the material. The result is that there is a current running.
If, however, you connect the battery in the opposite direction to the above image, the holes are attracted by the negative pole, and the electrons are pulled through the positive pole. The holes and electrons are actually pulled apart and will therefore not meet in the boundary layer. The result is that no power can flow. A diode therefore only guides in one direction! It is this principle that is used in solar panels to convert sunlight into electricity.
A semiconductor material has an electrical conductivity value falling between that of a conductor, like copper, gold, etc. and an insulator, such as glass. Their resistance decreases as their temperature increases, which is behaviour opposite to that of a metal. Their conducting properties may be altered in useful ways by the deliberate, controlled introduction of impurities ("doping") into the crystal structure. Where two differently-doped regions exist in the same crystal, a semiconductor junction is created. The behavior of charge carriers which include electrons, ions and electron holes at these junctions is the basis of diodes, transistors and all modern electronics. Some examples of semiconductors are silicon, germanium, and gallium arsenide. After silicon, gallium arsenide is the second most common semiconductor, used in laser diodes, PV cells, microwave frequency integrated circuits, and others. Silicon is a critical element for fabricating most electronic circuits.